High Frequency Off Grid Solar Inverter SX-HSI Series 3-5KW

  • Full digital voltage and current double closed loop control, advanced
  • SPWM technology, output of pure sine wave.
  • Two output modes: mains bypass and inverter output; uninterrupted power supply.
  • Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
  • Advanced MPPT technology with an efficiency of 99.9%.
  • Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
  • Power saving mode available to reduce no-load loss.
    Intelligent variable speed fan to efficiently dissipate heat and extend system life.
  • Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
  • 360 ° all-round protection with a number of protection functions.
  • Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc..

What is SX-HSI Series 3-5KW off-grid solar storage inverter ?

SX-HSI Series is an off grid solar storage inverter, for example SX-HSI4855-S80-H is a combination of 48V 5.5kw high frequency inverter, AC charger and Max 80A MPPT solar controller with Max 500Vdc 6kWp PV input.
SX-HSI Series support 24v or 48v system voltage version , also have 3.5kw or 5.5kw inverter output power optional.
SX-HSI4855-S80-HP and SX-HSI4855-S100-HP support 6 sets parallel connection into 33KW Single Phase output.

Model And Packing List

Item No. Battery Voltage MPPT Current Inverter Power AC Input and Output Voltage MaxPV Voltage Max PV Power Packing Size (cm) Weight (KGS)
SX-HSI2435-S80-H 24V 80A 3500W 230Vac 500V 4000W 37.8*28*10.3 10.5
SX-HSI4855-S80-H 48V 80A 5500W 230Vac 500V 6000W 42.6*32.2*12.6 10.5
SX-HSI4855-S100-H 48V 100A 5500W 230Vac 500V 6000W 42.6*32.2*12.6 10.5
SX-HSI4855-S80-HP 48V 80A 5500W 230Vac 500V 6000W 42.6*32.2*12.4 10.5
SX-HSI4855-S100-HP 48V 100A 6000W 230Vac 500V 6000W 42.6*32.2*12.4 10.5

Function

SX-HSI Series Inverter can connected with PV panel, AC mains ,Battery and Load to make a off grid solar storage system.

SX-HSI Series Inverter Intelligently switches between using solar power,battery storage and grid power. It can provide low costs energy for power stable places or stable power supply for grid unstable areas.

There are four charging modes:PV priority ,mains power priority, PV and mains mix charging,only solar power.

Three output modes: PV priority output, Mains priority output, Inverter (battery) priority output.

Charging Mode

PV Priority : 
Battery will charge from PV priority. when PV energy is unavailable(PV panel output voltage under PV operating voltage 120V)
then battery will be charged from mains . 
This charging mode make full use of solar energy in the daytime.
It is suitable for areas with relatively stable power grid and relatively expensive electricity price

Mains Power Priority: 
Battery will charge from mains, only when the mains supply is invalid, PV will start to charge battery. 
This charging mode will make battery always keep full. 
It is suitable for areas with unstable utility grid power and need backup power supply when power outage

PV and Mains Mix Charging:
When PV energy is sufficient , PV will charge battery priority, when PV energy is insufficient
(PV Charing current is less than charging current setting in the inverter), then PV and mains will charge battery at same time.
In the charing mode ,battery can be fully charged in fastest way. It is suitable for the area with unstable power grid, battery will use as backup power supply.

Only Solar :
Only use PV energy to charge battery.
This charging mode can save the electricty bills at most.
All the battery energy are from solar energy. It suitable for areas with good light condition or without mains connection.

Output mode

PV priority mode:
When PV energy and battery will supply power to load. When PV energy is invalid , Load will be supply by mains. 
In this output mode, Solar energy can be maximally used, battery will also maintain high charging level.
This mode is suitable for areas with stable power grid.

Mains supply priority mode :
Load will by powered by Mains priority . when mains power is invaild ,then the load will be powered by Inverter (Battery) 
In this output mode, the system will work as backup UPS. 
It suitable for area with unstable power grid.

Inverter priority mode:
Load will be powered by Inverter(Battery), When battery is low ,then load will be supply by mains . In this output mode, Battery energy
will be use maximally. This mode is suitable for areas with stable power grid

Operating Mode Built-in Optional Mode
Charging Mode PV priority Mains power Priority PV and main mix charging Only solar
Output Mode PV priority mode Mains supply priority mode Inverter(battery)priority mode

Connection and wiring

Dimension

Markets and Application Scenario

Off grid inverter works in many place, suitable for different utility grid conditions, you can use the inverter in different way.
In urban area, with Stable utility grid power but electrictiy price is high. In this suitation, off grid solar system can help max reduce electritiy bills.
In rural area , with Unstable utility grid power and need backup power supply when power outage. In this suitation, off grid solar system can provide stable power supply.

Typical Scenario First concern Charging Mode setting Output mode setting Method
urban area : Utility grid stable But electricity price is high Reduce electricity bills PV Priority Inverter Priority Max use solar energy and battery power
Rural area : Utility grid unstable Provide backup power when power outage PV & Mains mixed charging Mains Priority Always keep battery full and standby


Project Photos

Play Video

GET A WHOLE SELLING PRICE NOW

Solar with loT

Motior your solar system by phone

×

Hello!

Click one of our contacts below to chat on WhatsApp

× Hi